Anthracite coal is a high quality fossil fuel, which has long been used for home heating purposes. The anthracite coal is only found in the US state of Pennsylvania. Anthracite coal produces odor and smoke free heat and are also less expensive than most standard heating options such as electric and gas. However, there are both benefits and drawbacks of using anthracite coal as the fuel for your heating system. For anthracite coal supply, you can contact us at http://lehighanthracite.com/.
The biggest benefit of using anthracite coal is that it is a cost effective option as compared to other standard heating methods. For example, you will need 200 gallons of home heating oil to get the equivalent of one ton of anthracite coal. When it comes to propane, one ton of anthracite coal will equal more than 320 pounds of propane. As for electricity, you will need 8,500 kilowatt of electricity to equal one ton of anthracite coal. Another advantage with anthracite coal is that it can be stored at any place. Anthracite coal will not rot or spoil easily. The coal can be bought at bulk. Anthracite also comes in 30 to 50 pounds bag. However, keep this in mind that you will have to pay more for bagged coal than if you were buying bulk, or loose coal.
You need a stove or a boiler to produce heat from anthracite coal. If you are using a boiler, anthracite will take care of your room heating as well as water heating needs. When using anthracite in the boiler, you do not need a separate hot water heater. Steam boilers or hydronic boilers can easily heat a whole apartment. Different units in the apartment can control the heat with the help of individual thermostats. Water in a steam boiler remains hot all the time and you can use it anytime for laundry, cleaning, and bathing purposes.
However, there are also certain drawbacks of using anthracite for heating purposes. The biggest factor is the sparse availability of anthracite. This fossil fuel is found only in the coal mines of Pennsylvania, and its access to distant regions may be limited due to transportation and other costs. Moreover, you will need a furnace, a stove, or a boiler to use anthracite coal. However, operating these units is somewhat more difficult and complicated than natural gas or electric furnaces.
If you are using a stoker for burning anthracite coal, you will need to perform regular maintenance and will need to supply it regularly with coal as well as remove the ash. If you are burning anthracite for producing heat in the colder months, the ash removal needs to be performed daily. For every 50 pounds of anthracite, 5-10 pounds of ash is created and if the ash is not removed regularly, it will overflow the pan and create a lot of dust.
The chimney ventilating system needs to be cleaned of any ash accumulation, too. Dust may be another potential hazard with anthracite burning. And anthracite, as all other fossil fuel, emits carbon monoxide and you will therefore need to use a good chimney to keep the harm to environment to a minimum. For more details on anthracite and anthracite mining and availability, please refer to the website http://lehighanthracite.com/.
Incoming search terms:
- Disadvantages of anthracite coal
- propane vrs anthracite coal